RATED CAPACITY:
Upto 100/115mm to a depth of 30 mtrs. (100 ft.)
ANGLE HOLE DRILLING (OPTIONAL):
Drill can be fitted for angle drilling to drill 0-25 Degrees in step of 5 Degrees.
PULL DOWN PRESSURE:
Variable to 7,500 Kgs (16560 lbs) through hydraulic cylinder.
AIR COMPRESSOR:
10.3 m3/min at 7 kg/cm2 (365 CFM / 100 PSI) rotary vane type compressor.
ROTATION HEAD:
Hydraulic top drive head, variable speed 0 to 100 RPM Torque 300 kg.mt. (2172ft. lbs)
POWER UNIT:
Single Diesel Engine driven developing around 170 H.P. for driving compressor and hydraulic system through power take off arrangement.
MOUNTING:
Individual crawler track control gives full maneuverability on narrow benches. Pads are 16" wide triple grouser.
LEVELLING JACKS:
4 Nos. Hydraulic leveling jacks individually controlled.
MAST:
6.7 M. High (22 ft.).Electrically welder tubular construction suitable for 4.5M (15 Ft.) long drill rod.
DRILL RODS:
73mm / 76mm x 4.5 mtrs (15 Ft.) long drill rod with 23/8" API REG. Box and pin connection (OTHER SIZES AVAILABLE ON REQUEST)
ROD CHANGER:
Pivoted rod changer can carry 5 Nos. of 4.5 mtrs. (15 Ft.) long drill rods in a rotary fixture.
BREAK OUT WRENCH:
Break out wrench positioned hydraulically from the cab.
HYDRAULIC SYSTEM:
Three individual circuits. Total oil displacement 58 GPM (219 LPM) maximum pressure 140 kg/cm2 (2000 PSI)
DUST COLLECTOR:
The drill is equipped with low maintenance, compact dry type dust collector (LMP DC-300 Series).
CONTROL:
Control console provides fingertip control of all functions.
No comments:
Post a Comment